Finer, 24-Grit Tungsten-Carbide Rasp
- For Ornamental Shapes and Base Coats
- Custom-Crafted and Serial-Numbered
- Fine 24 Grit
In ten months of testing by professional contractors, paper can’t begin to compare with the dramatic performance of the DuraRasp on EPS foam walls! 12-grit proved to be only marginally better than 16-grit, but still no comparison to the long lasting DuraRasp.
It is necessary to rasp the entire expanded polystyrene (EPS) surface prior to EIFS base coat application. Completely removing the existing surface by rasping, removes any surface contaminants and the newly opened surface improves overall adhesion. Once complete it is necessary to remove any loose EPS material that remains on the wall surface and on the floor of the application area.
Rasping a EIFS EPS foam wall may be done with any of our DuraRasp rasp hand held rasping tools or by attaching self adhering our abrasive rasp paper to a standard rasp tool. Our 4 foot DuraRasp rasp can sometimes be a more efficient method as it addresses more surface area and assists in substrate flatness.