Operation
The fiat box is controlled by specially designed handles, ranging from 34" to 72", allowing heights of up to 12'™ to be finished from the floor.
The handle is attached to the flat box by sliding the box onto the handle and tightening the wing nuts securely.
There are only two adjustments on the flat box handle. First is the set screw in the pivot arm, which may be screwed in or out to adjust the width of the brake locking handle. Next is the aluminum ball on the handle which may be moved up or down the handle to ease operation of the fiat finisher.
Clean thoroughly, after every use, with a brush and water (or a water hose) to remove all joint compound from the tool. Then, after the tool is clean, lightly oil with Bazooka® Oil or LPS2
